Thursday, April 14, 2011

A Train Ride

We rode the train from Beijing to Qingdao. That’s a distance of about 490 miles (790 Km). On the high speed train it takes 5 hours and 45 minutes.

The first time I took this trip on a train it was an overnight sleeper that took over 12 hours.

The train is moderately high speed. Top speed I saw was 244 KPH, which is 152 MPH. We maintained this speed for the first couple hours, but then the speed was reduced as track conditions changed. The slowest sustained speed I saw was 164 KPH, or 100 MPH. The slower we went, the rougher the ride because of poorer track. At full speed the ride was very smooth. It was never a bad ride.

The Beijing South Railway Station is fairly new, and looks like an airport. It’s only for high speed trains. There are 24 tracks. A train leaves each track about every 15 minutes.

IMG_2667 (1024x768)

Leaving Beijing we passed a lot of factories…

IMG_2673 (1024x768)

and freeways.

IMG_2669 (1024x768)

Once clear of the city, we passed cities, villages, and farms. Never in the 490 miles did we see undeveloped land.

There’s lots of agriculture, but all that we saw was pretty small scale. Farms reaching to the horizon, but not fields reaching to the horizon. Most of the crops appeared to be vegetables, so huge fields are probably not appropriate. And the labor input is pretty high, as illustrated by this guy hand-watering.

IMG_3486 (1024x768) (2)

Several areas were covered with greenhouses. These greenhouses don’t just stretch as far as you can see in the snapshot. They really do reach the horizon. I have  no ideas how many acres are covered with these low greenhouses.

IMG_3471 (1024x768)

We saw many, many apartments under construction.

IMG_3475 (1024x768)

Never built one at a time, I’ve seen up to 35 buildings going up in a complex.

IMG_3478 (1024x768)

If you look between the buildings under construction in the photo below, you will see something that appears at any construction site-- worker housing. Its always blue and white, and always constructed out of sheet metal.

IMG_2686 (1024x768)

We think this is a fish farm. Couldn’t read the sign.

IMG_2675 (1024x768)

We saw plenty of older-style homes too. I say older-style because these appear to be brand new.

IMG_3483 (1024x768)

There is lots of industry. From small factories to large industrial complexes.

IMG_3490 (1024x768)

We saw coal trains…

IMG_2695 (1024x768)

coal yards…

IMG_2699 (1024x768)

and coal-burning power plants.

IMG_2697 (1024x768)

And many views of everyday life.

IMG_2693 (1024x768)

 

IMG_2692 (1024x768)

 

IMG_3480 (1024x768)

IMG_2691 (1024x768)

 

IMG_3493 (1024x768)

It was a very interesting trip, and a great way to see everyday life in China.

Friday, April 8, 2011

Manufacturing in Taiwan

This will be my fifth trip to China. On each trip I visit manufacturing plants in various cities. On this trip we stopped in Taiwan on the way to China to visit a few plants.

The contrasts between Taiwanese and Chinese manufacturing plants are interesting. Taiwan has achieved a reputation as a place from which to get high quality yet affordable machine tools and accessories (as well as many other products). China has a reputation for inexpensive machine tool accessories (as well as many other products). So what makes the difference?

I’m sure it will come as no surprise that the difference can be summed up in three words—attention to detail. While this obviously covers manufacturing practices such as quality control at each manufacturing step. It is also reflected in things like plant cleanliness and working environment.

Let’s take a look at some of the things I noticed.

clip_image002

The first thing I noticed when I walked into one of these Taiwanese plants was the floor. It’s painted green, not covered by many years accumulation of grease. The workers are sitting on stools and working at a bench. They are not sitting on old crates and working on the floor. They have proper tools and proper containers for the work.

clip_image002[6]

This woman is deburring her work pieces. The machine behind her is processing the next part so it doesn’t take any extra time. One of China’s big economic advantages is inexpensive labor. Why can’t they use just a little of that labor to debur a part once in a while?

clip_image004

We saw in-process QA after most production steps. They don’t wait to find problems in the completed product. Finding problems early has several advantages. The error is easier to correct if the product does not need to be disassembled to get to the issue. And the cause can be corrected more quickly if the problem is found early.

clip_image006

See the binder standing up in front of this woman applying labels to the product? She does not have to rely on memory to get the correct label in the correct spot. Process control ensures that products are made correctly, order after order.

clip_image008

And, of course, we saw excellent quality control. The two rows of tools are statistically correct samples from batches of finished products. The open binder shows production in what a correct product should look like. The sheet in the front is a detailed inspection report. One failure in a sample of this size means the entire lot will be checked one by one.

This entire blog is one big generality—Taiwan good, China bad. Don’t believe it for a moment. To say that all Chinese factories are poorly run is simply not true. There are all levels of production in China. Some products that we get from China are more precise than the “good old” American brand. And your iPad was not made in a factory with greasy floors. China is a huge place and you can get virtually anything made there to any quality standards.

Tuesday, June 22, 2010

The Shortest Day

I’m able to post this blog myself because I am in the Seoul Airport in Korea. All of a sudden I can see and edit my blog. Technical difficulties in China, I guess.

I left Qingdao, China at 10:00 AM this morning. I will land in Los Angeles at 10:10 AM this morning. If all goes well.

Wish me luck. Home soon!

The Wedding

On Sunday I attended a wedding in Qingdao. It was held at an upscale hotel and there were about 400 guests.

I apologize for the photos. Point and shoot camera, at long distance, and no flash.

We arrived right as the bride and groom did. To a drum corps of middle aged ladies. Very loud and energetic. This was in front of the hotel. The bride and groom entered the hotel and quickly disappeared.

IMG_3012 (1024x768)

In the hallway to the ballroom were three things.

The seating chart was on the wall about 10 feet wide. (I guess you gotta know where you are in the pecking order.)

IMG_3020 (1024x768)

A very good string quartet. Just as in Southern California, all the best young musicians are Chinese.

IMG_3019 (1024x768)

And the guest book. People sign their name quite large in the guest book. All Chinese but one.

IMG_3021 (1024x768)

The small red envelopes are for wedding gifts. All the same thing, just different denominations. Pretty practical. Kids get enough to get started in life.

The ballroom was done up pretty well.

IMG_3022 (1024x768)

There were just about 40 tables of 10 each.

IMG_3027 (1024x768)

Here’s a place setting. I still don’t know what’s in the favor package as I have to get it home to my wife and daughters while it is still intact.

IMG_3031 (1024x768)

Knowing the host of this party I was pretty sure we wouldn’t run short of food and drink. This is actually only the reserve stock. There were staging tables all around the room that were already provisioned.

IMG_3024 (1024x768)

All the guests took their seats, and an MC appeared. The big screens on the wall came to life with a count down to the appearance of the B&G.

IMG_3037 (1024x768)

The bride and groom came down the "isle". More like an elevated model's runway. They had a marriage ceremony. I saw rings exchanged, but have no idea what was said. Nothing religious, I'm sure. While they may exchange vows and such, the legalities are taken care of at some government office.

IMG_3042 (1024x768)

The bride and groom gave a very respectful bow to their parents, a gesture that I found very nice. Probably not going to happen in the US, right, girls?

IMG_3048 (1024x768)

The bride and groom then poured the first glass of Champagne. Actually, they poured the whole bottle over this pyramid of glasses, filling them all.

IMG_3053 (1024x768)

There were some short speeches (both fathers, plus some others), then it was over. As the bride and groom walked back down the isle, about 20 waiters appeared carrying the first dish.

The string quartet reappeared, and we enjoyed lots of food, and lots of drink.

IMG_3059 (1024x768)

The bride and groom cut the cake.

IMG_3063 (1024x768)

After a while, a piece of cake was delivered to our table.

IMG_3076 (1024x768)

Since you can’t eat wedding cake with chopsticks, they delivered forks to the table. That’s the fork, on top of the chopsticks.

IMG_3077 (1024x768)

These two girls came dancing down the runway. They were having a good time.

IMG_3082 (1024x768)

All the parents and the bride and groom, in two separate groups, visited each table. Here are the two fathers approaching a table.

IMG_3078 (1024x768)

I'm sure that I surprised both the bride and groom who had no idea a foreigner was going to attend.

IMG_3092 (1024x768)

Here’s our table about halfway through the meal. Actually, it must be getting towards the end because there is a fish on the table. That’s always one of the last dishes served.

IMG_3072 (1024x768)

I took this picture to show the way the local liquor pours. Just like charcoal lighter fluid. You should ingest them in about equal quantities. 103 proof. I declined.

IMG_3073 (1024x768)

Our server, pictured above, was responsible for our table and one other. I did not have to worry about my glass, or tea cup, going empty.

I did have to worry about those two guys across the table saying “gahn-bay”. I have two guide books that say that “gahn-bay” means “cheers”. Try it sometime. It means “bottoms-up”. If you want to say “cheers”, it is pronounced “cheers”.

I did enjoy the local wine. This is made just outside Qingdao.

IMG_3032 (1024x768)

These great folks sat at our table and took very good care of me. They always made sure I was the first to try every dish delivered to the table. Like, help, how do I eat this without embarrassing us all?

IMG_3097 (1024x768)

I took a picture of only one dish, which I was surprised to see. Henry said they served it because I was there. He was probably joking, because they served it to all 40 tables. Maybe not.

IMG_3075 (1024x768)

What’s so unusual? It’s American food. Sweet and sour pork. The only other time I have seen this in China, Henry and his brother ordered it as a joke. Here’s a tip. Don't expect the kind of food you get at your local Chinese restaurant in China. Everyone had exactly one bite.

Wednesday, June 16, 2010

Dinner with Henry's Friends

My trips to China always include meeting amazing people. Henry has unbelievable contacts and friends. (For more, see blog entries from my earlier trips).



Henry was among the first Chinese kids that got to go to college. I guess the government decided that college was a better method of education than some of the others they had tried.



The selection process must have been pretty rigorous, because every one of Henry's classmates that I have met is a huge success. I've probably met a dozen over my four trips to China. The other evening we had dinner with two more of Henry's classmates, both women.





Me, Cheng Lin, Ma Yanhong, Xu Ming (Henry's brother), Henry (Xu Hang)

Ma Yanhong is the first Chinese woman to win an individual Olympic gold medal. My wife and I saw her do it in 1984 in Pauley Pavilion at UCLA when we attended the individual gymnastics finals for the 1984 Olympics.


As you can see from her Wikipedia page, that was not her last success.


Cheng Lin is a singer. She's very well known in China, and has done very well judging by her house. Very nice. When I'm back in the US I'll try to edit this entry to tell you why she doesn't perform in China much anymore, but if I put it in this email it probably won't reach you.


Go to the Music tab on her site and listen to some of her stuff. Pretty good, I think. She's well connected. I looked at a pictorial biography of Quincy Jones while the classmates were catching up (in Chinese). It had a full page note from Quincy, personally signed.


Don't think I was left out of the conversation. Both of these women have excellent English (Cheng Lin's may well be better than mine). And you will never meet more gracious people.


We dined at "The Orchard". Set in an apple orchard with a pond, it could have been in Ojai (California). They serve California cuisine and do a pretty good job. California wine, too. That's pretty rare here. Cheaper wines are from Australia, better ones from France. I had my first glass of wine since leaving the US.


California prices, too, not that Henry's friends care. I had lamb chops because I thought the steaks were overpriced. The lamb was very tasty, but tough as nails. Just what I expected. Two of the guys did order steaks. Always about 1/2" thick (before cooking) and lots of bones. Sometimes I wonder what they do with the parts of the beef and chicken that does not have bones in it. Probably not fit for eating.


At dinner, I was thinking that Outback should open a branch or two in China. These guys all like a good steak and they are simply not available. Well, guess what I came across in my wanderings today in Beijing--an Outback. I didn't go in to see what the steaks look like, though.

Tuesday, June 15, 2010

CIMES Machine Tool Trade Show





For the last four days we have been attending the CIMES machine tool trade show. Here are the intro paragraphs from the show and venue Web sites:





CIMES is the largest machine Tool & Tools Exhibition in China & 3rd largest in the world, bringing together buyers from all corners the world with a key focus on 10 major industry group in China, to source new products and services over five trading days.





New China International Exhibition Center (NCIEC) is located at Tianzhu Airport Industrial and Commercial Zone in Shunyi District, Beijing. It consists of 8 exhibitions halls, boasting a gross indoor exhibition area of 100,000 square meters. With Convenient transport facilities, NCIEC neighbors the Capital International Airport in the east and Wenyu River Ecological corridor in the west. There is a first-class highway network around it. NCIEC is also convenient to reach by bus, subway, taxi and airport shuttle bus. A 24-hours parking lot is available opposite the NCIEC.



There are eight large halls in two rows of four with a central corridor connecting them all. It's big, but to put it into perspective, here are the sizes of a couple other well-known convention centers.





  • Las Vegas 3.2 million square feet (297,000 square meters)


  • Los Angeles 741,000 square feet (69,000 square meters)


  • Beijing 1 million square feet (93,000 square meters)


Here's the show Web site in case you want to look up your favorite vendor.



This show is aimed at Chinese manufacturers. Us foreigners are pretty rare. And many booths have no one that speaks English. Not a problem when Henry is around, but he's not always available. Luckily specifications and prices don't need an interpreter.



While we are looking for machine accessories and precision measuring tools, the full range of machine tools is represented. Including all the international brands of CNC machines that we used to see at WESTEC before it shrank to quarter size.



It is great to meet and talk to the people that make the products that we sell. They are invariably nice folks who are doing their best to turn out quality products. They appreciate the feedback we provide from the people that are using their products.



I've attended this show four times in six years. One change I have noticed is the improvement in the Chinese CNC machines. On my first visit it was very easy to walk the aisles and tell the Chinese-built CNC machines from the international standards like Haas and the European brands. The Chinese machines simply didn't look as polished as the others. It is now much harder to tell which is which. The Chinese machines now at least look as good as anyone's CNC machines.



Lots of laser cutting and marking machines. One laser was cutting 1/4" thick steel. The laser cutting machines work on huge sheets of thin metal. They excel at making many varied shaped holes, as seen on the back of a desktop computer.



Many of the laser marking machines would not be suitable for import into the US. Look carefully at the photo. See that bright dot? See any guards or shield? Tip: I did not take the photo through a glass or clear plastic panel. They almost invite you to swipe your hand through the beam just to see if it is hot.






As always, this show has some pretty big equipment. Some companies make a full range, from the smallest to the largest.






And some machines are simply huge.






Here's a booth I found interesting because of the "architecture".






Here's another large machine with a not atypical salesman ready to answer any question.






As at trade show everywhere, vendors strive to gain attention. I've never seen an electric cello before.






And finally, the Me Hoo both. Me Hoo is Henry's company that sells American tools in China.